How much travel should the front suspension have?

A 100- to 120mm Lightweight cross-country fork is ideal when your trails are smooth and flowy. The shorter travel gives a more responsive ride and you’ll enjoy better trail feedback through the bars and grips.

How much air should I put in my front suspension?

Sag should be discontinued 15-20% of the total fork travel

To get the best performance from your FOX suspension, adjust the air pressure to achieve the correct sag setting. Sag is the amount your suspension compresses under your weight and riding gear. Sag should be set at 15-20% of total travel.

Is 160mm travel too much for trail riding?

160mm of travel is only really needed when you’re riding big hucks or tackling really long, rocky fast descents. Do I need 160mm travel? 99% no.

How do you check the front suspension of a bike?

Is 120 enough to travel?

Also, you probably won’t notice much of a difference between a 120mm, 130mm and 140mm fork. Honesty, A 120mm fork will suffice for most trail riders.

Is 170mm travel too much?

But yes, 170mm is enoughyou’re into DH-esq travel, but if you think you could make use of it or help you get a shade more then there’s no harm in trying.

How much psi should I put in my front fork?

Adjust the fork to a pressure you have between 25%-30% sag. Let’s say the amount the fork compresses when you mount the bike in the normal riding position needs to be about a quarter of the total travel. If your Recon has 130mm of travel, it should sink 36-38mm with your weight.

How do you get air in the front fork?

How do I adjust my front suspension?

How much difference does 20mm of travel make?

As a rough estimate, each added 20mm of travel is equivalent to a a degree Difference in head tube angle.

Is 140mm travel too much?

In reality, 140 mm of travel is not much… it’s like bending your legs slightly … I think a lot of people are overwhelmed by how much travel to use. The important thing is that the travel you use suits the bike design and doesn’t compromise the angles or make it ‘chopper’.

Is 150 mm travel enough for Enduro?

What should I look for in the best enduro mountain bikes? An enduro bike is basically a mountain bike at least 150mm travel, but more often 160-180 mm. They’re built for the rigors of full-bore downhill racing, while also being sufficiently efficient on climbs and contoured trails.

How do I test my bicycle forks?

How do you check the front suspension of a mountain bike?

How important is static sag?

Static sag is important. How important? Primarily static sag when properly adjusted, can help you determine if you need a stiffer or softer shock spring. And it goes without saying that a bike with too much or too little static sag isn’t going to live up to its potential.

Is 100 mm travel enough?

Depending on your ability, riding style, and terrain, there is likely to be an ideal suspension travel. Other specs like geometry, wheels, and tires are also important, but they’re usually tailored to a bike’s suspension. Most modern mountain bikes have travel between 100mm and 170mm.

What does 120mm of travel mean on a bike?

Travel is how far the fork can be compressed (how much shorter it gets when pushed as far as it will go), as Spawne said. Short travel (typically 120mm or less) is suitable for cross country, Medium (typically 130-160mm) is for trail or all-mountain riding. Anything 160mm or more is suitable for downhill or freeride.

How much does it cost to go to Whistler?

The average price for a 7 day trip to Whistler is $1,547 for a solo traveler, $2,778 for a couple and $5,209 for a family of four. Whistler hotels range from $53 to $164 per night with an average of $104, while most vacation rentals cost $220 to $1,000 per night for the entire home.

Is 150mm travel too much?

150 mm is absolute overkill for any trail on the lower peninsula. Get a downcountry bike instead if you want to ride the full-suspension route. Or a badass hardtail.

Does a mountain bike need front suspension?

Convention now says that mountain bikes should have a front suspension fork. They are now considered an indispensable feature for almost all mountain bikers and mountain bike manufacturers.

What does 100mm travel mean?

Most full suspension bikes have about the same amount of travel front and rear. So If the rear shock has 100mm of travel, the bike will likely come with a 100mm (or so) travel fork.. 80 mm – 100 mm travel: “Cross Country” wheels.

What psi should my bike shocks be?

Often yes, usually rear shock absorbers run 100-200psi, but the psi of the fork varies greatly by design. Get about 25% sag (maybe a little less sag in the front than the rear) and see how it rides (that’s really important), adjust as needed on the trail.

What psi should my mountain bike suspension have?

The suspension is designed to work at its best between 25-35% sag (AKA a quarter to a third). For example, on a 100mm travel bike, you want to aim to bag 25-33mm of travel when you are on your bike. In our experience, it’s best to set sag while standing on the bike.

How to pump front shock absorbers?

Are air forks better than coils?

Air forks offer better bottom-out resistance

Towards the end of the range, tremendous force is required to further compress the air inside. The total force required to compress an air fork and bring it to the ground is greater than a spiral fork. This assumes both are set for the same rider weight.

Can you use a normal pump for shock absorbers?

A normal pump completely prevents the rider from setting a damper accurately because it transfers a lot of air and doesn’t have the bleed valve found on shock pumps. The bleed valve allows users to fine-tune the shock’s settings by gradually removing air.

How do you stiffen the air suspension?

With air spring systems, the roll stiffness of the car can be changed in two ways. First, it allows you to stiffen the spring rate Change in the effective volume of the spring, as described above. Stiffening the spring rate at only one end of the vehicle increases roll stiffness at that end.