How Much Travel Should a Trail Mountain Bike Have?

Path. Trail bikes usually have between 120mm and 150mm of travel. They’re not built for the toughest trails, but for trails worse than XC trails. As such, they have more travel than any XC bike and are mostly full suspension bikes, although you can find some hardtails in this category.

How much travel should a hardtail have?

That depends entirely on your driving style and the intended use. For quite a bit of XC or dirt jumping, get a 100mm XC or dirt jumping fork. For general trail riding a 120 to 130 would work fine. For AM to Light Freeride, a fork with 140 to 160 mm would be the right choice.

Is 150mm travel enough for Enduro?

What should I look for in the best enduro mountain bikes? An enduro bike is basically a mountain bike at least 150mm travel, but more often 160-180 mm. They’re built for the rigors of full-bore downhill racing, while also being sufficiently efficient on climbs and contoured trails.

How much suspension travel should you ride on an MTB?

We recommend ideally having a trail fork 34mm stanchions at 130-140mm for a 29er – possibly up to 150mm for the smaller 27.5” wheel size. As trail bike fork travel increases, your shock’s range of response becomes more complex.

How much difference does 20mm of travel make?

As a rough estimate, each added 20mm of travel is equivalent to a a degree Difference in head tube angle.

Is 120 enough to travel?

Also, you probably won’t notice much of a difference between a 120mm, 130mm and 140mm fork. Honesty, A 120mm fork will suffice for most trail riders.

Is 160mm travel too much for a hardtail?

Some riders might even prefer the feel of just putting some pressure on the air spring on their fork – simple as that! That’s not to say that a hardtail can’t work properly with 160mm travel forks, but it’s definitely harder when you have to balance efficiency and performance on a hardtail.

How much travel is too much for a hardtail?

Choose a framework that suits you, for the journey you want. I would say +-10mm The path is about the maximum you can get away with before going too far in either direction. So if you like the geo at 120mm then don’t stick 150s on it.

Is 150 mm travel enough for the descent?

Long travel bikes typically have 150-170mm of rear travel to handle hard descents. Front travel is often equal to rear travel but can sometimes be greater. Trail and enduro bikes fall into this category. They absorb big hits and smooth out rough terrain.

Is 150mm travel too much?

150 mm is absolute overkill for any trail on the lower peninsula. Get a downcountry bike instead if you want to ride the full-suspension route. Or a badass hardtail.

What does 130mm travel mean?

~130mm travel: “Trail” bikes

Around 130mm of travel would be what most companies would call a “trail” bike. These are generally designed for all-around riding. They climb pretty well and they descend pretty well. 130mm is also about the longest travel you’ll typically find on a hardtail.

Is 150mm travel enough for the bike park?

150 mm travel in the fork is sufficient! You will surely have a lot of fun. If you’re the biker for big jumps & drops and bike parks, the Swoop is a great bike. But takes away the fun of trail biking on tamer trails.

Is 170mm travel too much?

But yes, 170mm is enoughyou’re into DH-esq travel, but if you think you could make use of it or help you get a shade more then there’s no harm in trying.

How much travel should I use?

Adjust the sag to 20-30%. If you only ride smooth trails, you should still use about 3/4 of the suspension travel. Measure this because the exposed upper tube is longer than the fork’s travel. When you start riding harder or riding rougher trails and bigger drops, you need to add air.

Is 100 mm travel enough?

yes, it’s a lot. Pro-Dh’ers need/use 200mm. Just mortals will drive stuff that’s half as gnarly*, half as fast*. that will be 100 mm, which will then be enough for us.

Can I fit a 120mm fork on an 80mm bike?

120mm would be long for an XC frame that comes with an 80mm fork. I doubt the manufacturer would recommend that, but many people make these types of swaps without significant problems. It pushes the design limits of the frame, and when you push the limits of what the bike can do, you can run into problems.

Can you fit a 130mm fork on a 100mm bike?

at 130mm you’ll probably be fine, I wouldn’t put anything bigger on it. The Kona frames are pretty strong, I used to run a 130mm fork on my 100mm jump bike for AM and a lot more FR riding, I was fine.

Can I fit a 140mm fork on a 100mm bike?

There’s no good reason to slam a 140mm fork on a frame that’s rated for a 100. It won’t ride any better and it can break, as many others have pointed out.

What does 120mm of travel mean on a bike?

Travel is how far the fork can be compressed (how much shorter it gets when pushed as far as it will go), as Spawne said. Short travel (typically 120mm or less) is suitable for cross country, Medium (typically 130-160mm) is for trail or all-mountain riding. Anything 160mm or more is suitable for downhill or freeride.

How much does it cost to go to Whistler?

The average price for a 7 day trip to Whistler is $1,547 for a solo traveler, $2,778 for a couple and $5,209 for a family of four. Whistler hotels range from $53 to $164 per night with an average of $104, while most vacation rentals cost $220 to $1,000 per night for the entire home.

Is 80 mm travel enough?

I did 3 rides with it and came to the conclusion 80mm is not enough. I have to let too much air into it to make it plush. Increasing the travel to 90mm made a noticeable difference in the pluses. If your frame has room I would suggest 100mm.

Can you mount downhill forks on a hardtail?

You can always go downhill with a hardtail You don’t have to pull the speed you would normally do on a dh bike. but as another member said on the singletrack, you slide away. and as for the frame break, the head angle doesn’t really change with a 6 inch fork.

How much does the travel of the fork affect the steering angle?

If you increase the travel of the fork by 20mm to 150mm, the head tube angle will be weaker about 1° and increase the front median by 10 mm.

Is it possible to reduce the travel of the MTB fork?

Yes, your a2c will change by whatever you reduce travel. Spring rate is also affected, so you’ll need to add a few more psi to get proper sag (per the Fox link below). Remember that reducing travel will also change the geometry of your bike. Check out the link below.

Are 32mm standpipes sufficient?

Third, axle dimensions and interfaces make a bigger difference than stanchion diameter. For most riders (except for the really heavy guys) – a 140mm / 32mm fork – the Rev in particular is stiff enough.

What is mountain bike travel?

Traveling is easy the maximum distance that either a mountain bike’s front or rear suspension can travel absorbing forces before bottoming out. The higher the spring deflection, the more power the chassis can comfortably absorb. The lower the spring deflection, the lower the force absorbed.